Franky73

[Franky73]

Hi all,
I am begginer with Xbox360 drive flashing but i tried to do.

I have a Lite-on drive and purchased a CK3 lite for doing the flash.
I used JungelFlasher software pack downloaded from the net.

Everything went well until the point of 'ERASE' the drive.

During the erase the windows XP had frozen. I tried again (power off the drive, disconnect the SATA cable, power on the drive again, push on ERASE the drive in JungleFlasher, power OFF/ON the drive whitin 1 sec.) but the XP frozen again.

At 3th try the Windows started again from BIOS and could not boot in.

SO NOW my hacked firmware is gone (it was saved in drive C: on PC) and the drive erase is not complete.

Now the erase of the drive is not comlete so each time i connect the drive to SATA card in the PC and power on the drive the Windows XP is frozen.
Would somebody so kind to help me out? Is it possible to bring the drive back to live?

Thanks, Bye

[lostidentity]

It is usually easier to connect to a port on the MoBo but if you have to use the card it sounds like you have a driver problem and that is why it is freezing. Did you properly erase the old drivers and use the PORTIO32 ones instead?

you DO NOT want to use the normal erase button in jungle flasher you NEED to use the Lite-on Erase button next to the BenQ unlock and sammy unlock.

hacked firmware is easy to get again the real problem is if you actually did erase everything and you dont have your key.

Regarding the computer, does it boot into windows or no? Check your bios settings and if you do not know what you are doing select reload optimized defaults to reload the default settings that will work.
OR
try a safe mode boot and see what it hangs driver is at the bottom of the list when it locks up.

[lostidentity]

Oh and could a mod move this to the CK3 section or other? cause this doesnt belong here.

[Franky73]

hi,

I did not erase the old drivers before installed the portio32.exe.
I will do so.
The computer is OK now. How I can get a hacked firmware?

Maybe a I can do something regarding the key.

Thanks.

[lostidentity]

The firmware is on xecuters site
http://team-xecuter.com/files/click.php?id=26

if you didnt actually do a proper erase then you might still be able to get the key.
before trying to flash see if you can extract the key normally.

[tonyintn]

May not be what u would like to hear but you better find either your dump files or the CFW jungle erases by default when you write the keys nor the identity is no longer on that drive the identity can be rebuilt but you are SOL if you did not have a copy stored or write down your keys. Word to the wise always make sure you have a copy of your keys first befor doing anything heck save a text file with your keys in it and also write them down by hand on paper.