t0pb0y
15th January 10, 17:40
Hi
As a complete novice, I thought I would 'have a go' at flashing my 360 (with the LiteOn 74850 drive) using a 360 Blaster.
So, having managed to succesfully open my 360 and fit the Blaster, I was on my way.
Using Jungleflasher 1.69, I managed to recover the drive key using the probe, and then created and saved the following files :-
Dummy.bin
Identify.bin
Inquiry.bin
key.bin
Serial.bin
Lite_CFW.bin
After initiating the LiteOn Erase, it all went wrong (and I guess I panicked), and powered off the PC and 360. Any way to cut a long story short, the drive no longer responds (will not eject etc)
How do I recover from this and continue the process
As a complete novice, I thought I would 'have a go' at flashing my 360 (with the LiteOn 74850 drive) using a 360 Blaster.
So, having managed to succesfully open my 360 and fit the Blaster, I was on my way.
Using Jungleflasher 1.69, I managed to recover the drive key using the probe, and then created and saved the following files :-
Dummy.bin
Identify.bin
Inquiry.bin
key.bin
Serial.bin
Lite_CFW.bin
After initiating the LiteOn Erase, it all went wrong (and I guess I panicked), and powered off the PC and 360. Any way to cut a long story short, the drive no longer responds (will not eject etc)
How do I recover from this and continue the process