Team Xecuter

Team Xecuter http://www.team-xecuter.com/forums/ Team Xecuter - Rocking The Box Since 2002 en Thu, 17 May 2012 06:02:16 GMT vBulletin 60 http://www.team-xecuter.com/forums/images/xecuter_skin/misc/rss.jpg Team Xecuter http://www.team-xecuter.com/forums/ usbhdd lifespan http://www.team-xecuter.com/forums/showthread.php?t=86534&goto=newpost Thu, 17 May 2012 04:38:45 GMT I have all my games backed up to my external ushdd. I was wondering how long I should expect it to last. How often does the xbox have to read from the drive? Is their alot of multiple reads going on? Would one format god, iso mean less reading of the platters? Thanx guys I have all my games backed up to my external ushdd. I was wondering how long I should expect it to last. How often does the xbox have to read from the drive? Is their alot of multiple reads going on? Would one format god, iso mean less reading of the platters? Thanx guys ]]> The Noob Room joemegahertz http://www.team-xecuter.com/forums/showthread.php?t=86534 Jtag E79 Xell-reloaded writing failure http://www.team-xecuter.com/forums/showthread.php?t=86533&goto=newpost Thu, 17 May 2012 04:35:35 GMT HELLO! WELCOME TO MY VERY FIRST POST EVERY ON THIS WONDERFUL WEBSITE! I HAVE PUT THIS THREAD UP TO SEEK HELP FROM THE WISE, SO I PICKED HERE! (PLUS I PURCHASED TOP QUALITY ITEMS FROM HERE) SO LETS GET TO IT, I HAVE A 16 MB XENON XBOX WITH A 1903 CB, I HAVE 4 MATCHING NAND DUMPS, I USED TEAM... HELLO! WELCOME TO MY VERY FIRST POST EVERY ON THIS WONDERFUL WEBSITE! I HAVE PUT THIS THREAD UP TO SEEK HELP FROM THE WISE, SO I PICKED HERE! (PLUS I PURCHASED TOP QUALITY ITEMS FROM HERE) SO LETS GET TO IT, I HAVE A 16 MB XENON XBOX WITH A 1903 CB, I HAVE 4 MATCHING NAND DUMPS, I USED TEAM EXUCUTER'S LASTEST AND GREATEST TOOL, J-RUNNER. EVERYTHING WENT AS PLANNED UNTIL I WROTE XELL-RELOADED TO MY CONSOLE (WHICH AT THE TIME HAD NO JTAG EXPLOIT) I TURN ON THE XBOX TO BE TAUNTED BY A E79 ERROR ]= (THIS HOWEVER HAS NO ERROR CODES) THEN, I JTAGGED IT, (AS YOU SEE IN MY PHOTOS) WHICH, STILL LEFT ME WITH AN E79, I BELIEVE MY SOLDERING COULD BE A BIT MORE NEAT, BUT I ALSO RE-WROTE THE HACKED IMAGE 3 TIMES TO MY XBOX TO ENSURE IT WORKED CORRECTLY.

Attached Images

	003.jpg (552.6 KB)
	004.jpg (531.0 KB)

]]> RGH / JTAG 4 Noobs uGz Techno http://www.team-xecuter.com/forums/showthread.php?t=86533 Can someone confirm this? http://www.team-xecuter.com/forums/showthread.php?t=86532&goto=newpost Thu, 17 May 2012 04:22:34 GMT hey guys, first post here.

im a total noob but I've been scouring the board for tutorials all day now, and i hate asking for help but i was hoping someone could confirm my jf log file before i re-lock my drive. Honestly, im not too optimistic since i've never done a kamikaze hack before, and this chip is so small that there is literally ZERO room for error. Despite all that i think i might have read and written the LT+ 3.0 fw successfully. The drive opens and closes, too. I'm not sure if it reads games because i haven't installed it back into my xbox since i haven't re-locked it yet.

The reason i am a little apprehensive is because the first 2 read attempts after the SPI unlock failed at "Sending sector erase to port 0x9000". JF just didn't respond, then crashed. The third time appeared to work even though i didn't do anything different.

Anyway here is the log:

JungleFlasher 0.1.92 Beta (304)
Session Started Wed May 16 21:07:15 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 1 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives E:

Drive is Slim Lite-On..

Key found in KeyDB at record (1 - firmware)
Key is: **REMOVED**
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x9000
Status 0x51
Re-sending Vendor Intro:
...........
Serial flash found with Status 0x72

Sending Device ID request to port 0x9000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x9000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorised !
Grabbing sector 0x3E000.
................
Blank 3E000 sector detected!
Known f/w confirmed !
Sending Vendor Intro to port 0x9000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72

Sending Device ID request to port 0x9000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Updating flash for on-line dump.

Sending Sector Erase to Port 0x9000
Erasing: 0x3E000
Writing: 0x3E000
............
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 1696mS

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x9000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore 0x3E000 verified !

Lite-On Dump file saved to Lite-OFW.bin
Loading firmware from buffer
Drive key @ n/a **REMOVED**
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: Stock
Key database updated

Auto-Loading firmware file C:\Users\HTPC\Downloads\JungleFlasher.0.1.92.Beta( 304)\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0272-v3.0.bin
MD5 hash: 76b991307ddd5b2af581d0608e671b36
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Drive is Slim Lite-On..

Key found in KeyDB at record (1 - Xbox 2.0.14719.0)
Key is: **REMOVED**
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x9000
Status 0x51
Re-sending Vendor Intro:
.....
Serial flash found with Status 0x72

Sending Device ID request to port 0x9000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x9000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x9000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 1704mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x9000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore verified OK !
Drive is Slim Lite-On..

I noticed it says "Blank 3E000 sector detected!", is that cause for concern?

I only managed to get my Lite-OFW.bin, too. slimkey extract failed so i don't have a Dummy.bin. Is that normal?

I also intro'd/read the drive again after writing so i could load the FW into the source buffer to confirm the write, and it did read LT+ 3.0, so that's good i think ]]> The Noob Room predicate http://www.team-xecuter.com/forums/showthread.php?t=86532 coolrunner green led brief blink http://www.team-xecuter.com/forums/showthread.php?t=86529&goto=newpost Thu, 17 May 2012 03:11:56 GMT ok, so i got this jasper 512 that is being a bugger to glitch. i wired it up nice and tight for all the points except the stby_clk which i had to run a trace repair on(the reason i got it so cheap :D). the coolrunner is flashed with the jrunner default jasper xsvf, but flashes either once or five... ok, so i got this jasper 512 that is being a bugger to glitch. i wired it up nice and tight for all the points except the stby_clk which i had to run a trace repair on(the reason i got it so cheap :D). the coolrunner is flashed with the jrunner default jasper xsvf, but flashes either once or five times, not three or four, its once or five times then it stops with no picture on the screen. im trying to get into xell, with the ecc i wrote.
this is rgh 1.0.
i know the rules state that i need pics...i took them, but now i cant find my cable to upload them to pc ._____. ]]> RGH / JTAG 4 Noobs CheaterTheHax http://www.team-xecuter.com/forums/showthread.php?t=86529 GENERAL Quick hard drive Question http://www.team-xecuter.com/forums/showthread.php?t=86528&goto=newpost Thu, 17 May 2012 02:39:52 GMT im about to buy a new xbox and i dont know weather to buy a 4gb and get an external 250gb works out cheaper or get and xbox with the 250gb. My question is, will an external hdd be just as good as the inbuilt one, will it be the same to save game sonto and play of, or will the be a delay due to... im about to buy a new xbox and i dont know weather to buy a 4gb and get an external 250gb works out cheaper or get and xbox with the 250gb.

My question is, will an external hdd be just as good as the inbuilt one, will it be the same to save game sonto and play of, or will the be a delay due to usb connection ? ]]> General 360 Chat Raeks http://www.team-xecuter.com/forums/showthread.php?t=86528 <![CDATA[[FOR SALE] JASPER 16 MB]]> http://www.team-xecuter.com/forums/showthread.php?t=86527&goto=newpost Thu, 17 May 2012 02:21:06 GMT just like you see in the picture i dont have a avg cable but i will give you a hdmi cable...the price is only 100.00 plus shipping ...hdd is 60 gb

]]> Trader Advertising juanbrnt http://www.team-xecuter.com/forums/showthread.php?t=86527 GENERAL xenon problems http://www.team-xecuter.com/forums/showthread.php?t=86526&goto=newpost Thu, 17 May 2012 02:01:30 GMT my xenon xbox is missing the c1u1 resister. the 1 pad got ripped off. the error code is 0022. plus it takes like 30 seconds to show rrod. i was wondering if this was the problem. how exacly do i fix this. my xenon xbox is missing the c1u1 resister. the 1 pad got ripped off. the error code is 0022. plus it takes like 30 seconds to show rrod.
i was wondering if this was the problem. how exacly do i fix this. ]]> The Noob Room isleezer http://www.team-xecuter.com/forums/showthread.php?t=86526 Case Cut out New England Patriots http://www.team-xecuter.com/forums/showthread.php?t=86524&goto=newpost Thu, 17 May 2012 00:01:32 GMT Here's something I did a couple months ago. :cool2:

Attached Images

NEP.jpg (68.4 KB)

]]> The504 http://www.team-xecuter.com/forums/showthread.php?t=86524 GENERAL my stab at a bit of this for fun http://www.team-xecuter.com/forums/showthread.php?t=86523&goto=newpost Wed, 16 May 2012 23:12:04 GMT here's my stab at this....

not much but was fun to do.and i thought it fitted in right,plus it helps when the ower says do what you like lol
:rolleyes2:

Attached Images

	1.jpg (426.1 KB)
	2.jpg (643.8 KB)
	3.jpg (394.1 KB)
	5.jpg (416.5 KB)
	6.jpg (326.0 KB)

]]> dgenx http://www.team-xecuter.com/forums/showthread.php?t=86523 Coolrunner rev C, phat QSB and RGH 2.0 http://www.team-xecuter.com/forums/showthread.php?t=86522&goto=newpost Wed, 16 May 2012 21:00:47 GMT Hi guys,

Is there wiring diagram for phat QSB and RGH 2.0 ?

I see for RGH and QSB, but that is it...

Unless I am mistaken and phat QSB wiring doesn't change ? ]]> RGH / JTAG 4 Noobs thed00d http://www.team-xecuter.com/forums/showthread.php?t=86522 JTAG E79 error with my Jtagged Xenon 360 http://www.team-xecuter.com/forums/showthread.php?t=86521&goto=newpost Wed, 16 May 2012 20:32:04 GMT Hi guys,i'm in real need of some help here.My Jtagged my Xenon 360 with when i bought the console,the dashboard was on 2.0.6717.0 (exploitable for sure). i went ahead and removed the R6T3 resistor to prevent any further efuses being blown.I then fitted and soldered all the Nand-X QSB's properly and securely,installed my Nand-X programmer on my computer and then used Coolshrimps Jtag Tool to do all the nand reading and stuff,which all went perfect (i had 1x bad block on 271 of the nand and was informed that it shouldn't be a problem as it's not a bad block near to the beginning of the nand).I needed to update my console to a newer dashboard so i used the latest J-Runner software to update,that seemed to work perfect as well up until a few days ago,when i switched on my machine and was greeted with an E79 error on my tv screen.I've tried booting my console with my HDD disconnected but still get E79.I've gone all over the QSB's solder points and re-tinned them,i've even gone back to trying the switching diodes method and removed the 2x Jtag QSB's.
I can re-write my original Nand image back onto my console and it'll boot back up perfect to the 6717 dashboard but when i even write Xell to my Nand and try to boot via the Eject button.I'm still greeted with an E79 error.Could i write 2.0.7371.0 retail dash using J-Runner and start from scratch building and re-writing my hacked FreeBoot image to dashboard 2.0.14719.0.
I'm proper pulling my hair out over this and any help at all would be truely thankful indeed ]]> The Noob Room evertonman67 http://www.team-xecuter.com/forums/showthread.php?t=86521 JR Programmer update? http://www.team-xecuter.com/forums/showthread.php?t=86520&goto=newpost Wed, 16 May 2012 20:29:27 GMT I cant figure out how to update my jr programmer with x360 usb update, i need to update it to v3 but cant figure out how I cant figure out how to update my jr programmer with x360 usb update, i need to update it to v3 but cant figure out how ]]> RGH / JTAG 4 Noobs JSully http://www.team-xecuter.com/forums/showthread.php?t=86520 RGH console not turning on - power brick orange http://www.team-xecuter.com/forums/showthread.php?t=86518&goto=newpost Wed, 16 May 2012 19:57:34 GMT okay have done numerous RGH consoles .... this one came in .. a jasper CB 6750 .... at first it wouldnt glitch no matter what i tried ...... managed to get it to glitch once or twice and then when i closed up the box ... the box wouldnt turn on ..... power brick orange .... no life on console ....... okay have done numerous RGH consoles .... this one came in .. a jasper CB 6750 .... at first it wouldnt glitch no matter what i tried ...... managed to get it to glitch once or twice and then when i closed up the box ... the box wouldnt turn on ..... power brick orange .... no life on console .... though nand corrupted ... opened up tried reading nand .. could not detect flash controller ..

read around on the forums ... suggested replacing the STBY_CLK resistor .... measured the other resistors in the strip .... read 30-38 ohms ..... R4B24 didnt register on the multimeter .. so i replaced it with a standard(NOT SMD) 1/4 watt 33 ohm resistor ..... still the console wouldnt boot .... tried alt points aswell on the bottom of the board ... nand doesnt get detected ... console doesnt turn on ..

any ideas ? .. im a bit confused :S ]]> RGH / JTAG 4 Noobs faizy http://www.team-xecuter.com/forums/showthread.php?t=86518 RGH 3rrod 0022 Points destroyed http://www.team-xecuter.com/forums/showthread.php?t=86517&goto=newpost Wed, 16 May 2012 19:45:57 GMT Hi, I bought this xbox on internet. I thought it had an ldv problem (seller says it takes about 10-15 sec to rrod) but it rrods in 5 sec and have this cpu_rst and cpu_pll_bypass. Can you please guide me and help on how to fix it if it is even possible, since i have no expert to send to fix. i... Hi,

I bought this xbox on internet. I thought it had an ldv problem (seller says it takes about 10-15 sec to rrod) but it rrods in 5 sec and have this cpu_rst and cpu_pll_bypass. Can you please guide me and help on how to fix it if it is even possible, since i have no expert to send to fix. i have some pratice, i am not a pro but i would like to try fix because it´s a jasper. I didn´t try to rewrite the original nand. Thanks in advance.

Best regards ]]> RGH / JTAG 4 Noobs Varezz http://www.team-xecuter.com/forums/showthread.php?t=86517 JTAG What are the default temperature values in xebuild? http://www.team-xecuter.com/forums/showthread.php?t=86516&goto=newpost Wed, 16 May 2012 19:37:36 GMT Hi :smile: Can somebody tell me the default values of the temperatures in xebuild? I just jtag a xenon and wanted to adjust these settings to make it run a little cooler but i need the default values as baseline. Where can I find these values? Thanks :smile: Hi :smile: Can somebody tell me the default values of the temperatures in xebuild? I just jtag a xenon and wanted to adjust these settings to make it run a little cooler but i need the default values as baseline. Where can I find these values? Thanks :smile: ]]> RGH / JTAG 4 Noobs luniq http://www.team-xecuter.com/forums/showthread.php?t=86516